Capping Workstation

Decrease clutter on workbench. Minimizes time spent closing and locking bottles. Tightens bottles for maximum fasten. Relieves tedious wrist turning. Easy to use.

Specifications

Item NumberCapping Workstation
Tool StandTool stands are recommended to protect your investment and decrease clutter on your workbench. This tool stand will support a maximum of 10 lbs (4.5 kg). Combined with the appropriate tool balancer will keep your screwdriver at the ready overthe work surface. Features: Aluminum construction Supports up to 10 lbs (4.5 kg) Height adjustableto 44 in (110 cm) Sliding toolhanger for horizontal motion Reach to 24 in (60 cm) Arm pivots 180 degrees. Mount stand without drilling holesusing bench clamp
Tool Balancer, 3.0-5.0Tool balancers, used in conjunction withour tool stand orexisting overhead support, will keep your screwdriver at the ready, leaving your work area clear when the driver is not in use. These balancers are easy to install and adjust. Choose theappropriate model to suit the weight of your screwdriver
Electric Screwdriver & Hii/Lo SPD ControllerTorque Ranges: 7 -26.4 In Lb Speed Ranges: 550 RPM Lockable External Torque Adjustment -optional torque locking sleeve makes it easy to set up and secure Wide Torque Range -single model versatility Rare Earth Magnet Motor -high torque output Low Torque Reaction Compact -light and easy to handle Ergonomic - less operator fatigue
Custom Drill Chuck HeadOur bottle capping chuck is an aluminum shell, or cup with a soft urethane liner pressed into the chuck by hand, creating a tight fit between the chuck and liner. The chuck is attached to a capping machine that enables the capping machine to grip a cap. The grip generated by the chuck with the inserted liner is what allows the capping machine to tighten a cap onto a bottle.
Bench Clamp(Not Shown) optional if you wish not to screw down the Tool Stand
Item NumberCapping Workstation
Tool StandTool stands are recommended to protect your investment and decrease clutter on your workbench. This tool stand will support a maximum of 10 lbs (4.5 kg). Combined with the appropriate tool balancer will keep your screwdriver at the ready overthe work surface. Features: Aluminum construction Supports up to 10 lbs (4.5 kg) Height adjustableto 44 in (110 cm) Sliding toolhanger for horizontal motion Reach to 24 in (60 cm) Arm pivots 180 degrees. Mount stand without drilling holesusing bench clamp
Tool Balancer, 3.0-5.0Tool balancers, used in conjunction withour tool stand orexisting overhead support, will keep your screwdriver at the ready, leaving your work area clear when the driver is not in use. These balancers are easy to install and adjust. Choose theappropriate model to suit the weight of your screwdriver
Electric Screwdriver & Hii/Lo SPD ControllerTorque Ranges: 7 -26.4 In Lb Speed Ranges: 550 RPM Lockable External Torque Adjustment -optional torque locking sleeve makes it easy to set up and secure Wide Torque Range -single model versatility Rare Earth Magnet Motor -high torque output Low Torque Reaction Compact -light and easy to handle Ergonomic - less operator fatigue
Custom Drill Chuck HeadOur bottle capping chuck is an aluminum shell, or cup with a soft urethane liner pressed into the chuck by hand, creating a tight fit between the chuck and liner. The chuck is attached to a capping machine that enables the capping machine to grip a cap. The grip generated by the chuck with the inserted liner is what allows the capping machine to tighten a cap onto a bottle.
Bench Clamp(Not Shown) optional if you wish not to screw down the Tool Stand

Decrease clutter on workbench. Minimizes time spent closing and locking bottles. Tightens bottles for maximum fasten. Relieves tedious wrist turning. Easy to use.

  • Tool Stand
  • Tool Balancer, 3.0-5.0
  • Electric Screwdriver & Hii/Lo SPD Controller
  • Custom Drill Chuck Head

Instructional Video

Check out the capping workstation to find see how to cap our trademarked click-lock bottles